Violin Neck Graft Course Part 1, Chapters 1-6
-
1. Introduction, choosing and planing the neck block (10:56)
-
2. Fitting, gluing and trimming back the peg bushings (23:50)
-
3. Sawing off the neck and chopping out the neck root (10:46)
-
4. Removing the old French neck graft (17:30)
-
5. Fitting and gluing pieces of wood into the French neck graft cut-outs (27:47)
-
6. Fingerboard preparation (24:43)
Violin Neck Graft Course Part 1, Chapters 7-11
Violin Neck Graft Course, Chapters 12-15
-
12. Positioning and gluing the fingerboard onto the neck (30:05)
-
13. Removing excess wood from the neck and shaping top and bottom surface of the fingerboard (18:17)
-
14. Establishing the pegbox, roughly shaping the neck and the nut (55:23)
-
15. Finalising the nut and fingerboard and conclusion (13:23)
Violin Neck Graft Course Part 2, Chapters 1 & 2
Violin Neck Graft Course Part 2, Chapters 3-5
Violin Neck Graft Course Part 2, Chapters 6-10
-
6. Application and scraping down of filler varnish along the joints (16:33)
-
7. Retouching of the neck graft area (54:06)
-
8. Retouching of the heel area (31:46)
-
9. Applying patina, oiling the neck and finishing the nut and fingerboard (12:43)
-
10. Explanation of the positioning of the peg holes and conclusion (6:11)
