Violin Neck Graft Course Part 1
-
1. Introduction, choosing and planing the neck block (10:56)
-
2. Fitting, gluing and trimming back the peg bushings (23:50)
-
3. Sawing off the neck and chopping out the neck root (10:46)
-
4. Removing the old French neck graft (17:30)
-
5. Fitting and gluing pieces of wood into the French neck graft cut-outs (27:47)
-
6. Fingerboard preparation (24:43)
-
7. Establishing the 3 flat surfaces inside the pegbox (23:48)
-
8. Transferring angles and band sawing of the neck block (14:18)
-
9. Fitting the neck graft (21:43)
-
10. Gluing the neck graft (15:12)
-
11. Establishing the neck surface for the fingerboard (22:46)
-
12. Positioning and gluing the fingerboard onto the neck (30:05)
-
13. Removing excess wood from the neck and shaping top and bottom surface of the fingerboard (18:17)
-
14. Establishing the pegbox, roughly shaping the neck and the nut (55:23)
-
15. Finalising the nut and fingerboard and conclusion (13:23)
